Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #8

Bewerken voor Patrick Robichaud —

Bewerking goedgekeurd door Patrick Robichaud

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the visible screws holding down the LCD panel frame and the inverter and bluetooth circuit boards located below the LCD. The metal assembly will come out from the plastic backing.
-[* black] The LCD panel is attached on 3 corners by screws, undo these and the screen should come out from the assembly.
+[* black] The LCD housing is attached to the plastic back panel on the 4 corners, including on the hinges. Remove these screws.
[* black] Now would be a good time to protect your screen with bubble wrap or foam bordered by tape. Green X is for visibility and warning.