Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor Priya Sumeran

Bewerking goedgekeurd door Priya Sumeran

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] WithInsert a spudger, begin to pry offspudger into a thin crack running along the basesside of the laptop.
[* black
Gently pry open along the perimeter of the laptop to remove the base.
[* icon_note
] You can lay the back panel flat against the surface you are working on to make the task less cumbersome.
[* black] After completely prying the two bases from each other, set the top base flat against the back panelpanel, revealing the circuit board.
[* black] WithInsert a spudger, begin to pry offspudger into a thin crack running along the basesside of the laptop.
[* black
Gently pry open along the perimeter of the laptop to remove the base.
[* icon_note
] You can lay the back panel flat against the surface you are working on to make the task less cumbersome.
[* black] After completely prying the two bases from each other, set the top base flat against the back panelpanel, revealing the circuit board.