Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Mikel Sangroniz

Bewerking goedgekeurd door Mikel Sangroniz

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] TheRemove the following four screws that hold the motherboardbase to the top of the base from inside. The screws can be removed in any order.motherboard:
[* red] One 1.5 mm Phillips #0#1 screw located near the center of the laptop.
[* yellow] One 1.5 mm Phillips ##1 screw located at the top, center, next to the metal guard.
[* icon_note] This screw is concealed by a black wire running across the top of the laptop. You will have to move the wire to the right in order to remove the screw.

[* orange] Two 1.5 mm Phillips # 0#1 screws located next to the fan.
[* black] TheRemove the following four screws that hold the motherboardbase to the top of the base from inside. The screws can be removed in any order.motherboard:
[* red] One 1.5 mm Phillips #0#1 screw located near the center of the laptop.
[* yellow] One 1.5 mm Phillips ##1 screw located at the top, center, next to the metal guard.
[* icon_note] This screw is concealed by a black wire running across the top of the laptop. You will have to move the wire to the right in order to remove the screw.

[* orange] Two 1.5 mm Phillips # 0#1 screws located next to the fan.