Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #14

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Switch on your multimeter, and set the dial to resistance mode. (Resistance
[* icon_note] Resistance
is measured in ohms, indicated by the symbol '''Ω'''.)'''Ω''' symbol.
[* black] Most multimeters are not autoranging, meaning you will need to set the correct range for the resistance you intendexpect to measure. If you're not sure, start with the highest setting.
[* black] Switch on your multimeter, and set the dial to resistance mode. (Resistance
[* icon_note] Resistance
is measured in ohms, indicated by the symbol '''Ω'''.)'''Ω''' symbol.
[* black] Most multimeters are not autoranging, meaning you will need to set the correct range for the resistance you intendexpect to measure. If you're not sure, start with the highest setting.