Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #5

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] To complete your continuity test, place one probe at each end of the circuit or component you want to test.
[* icon_note] It doesn't matter which probe goes where; continuity is non-directional.
[* black] As before, if your circuit is continuous, the screen displays a value of zero (or near zero), and the multimeter '''beeps'''.
[* black] If the screen displays 1 or OL (open loop), there's no continuity—that is, there's no path for electric current to flow from one probe to the other.
[* icon_note] Continuity is non-directional, meaning it doesn't matter which probe goes where. But there are exceptions—for instance, if there's a diode in your circuit. A diode is like a one-way valve for electricity, meaning it will show continuity in one direction, but ''not'' in the other.