Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[title] Size Selection
[* icon_note] A correctly sized driver should “fill up” the screw head, utilizing both the full depth and width of the socket.
[* blackred] Beginners commonly make the mistake of using a driver that’s too small. An undersized driver slips easily, damaging the screw head and making it difficult to turn afterward—even with a correctly-sized driver. This is known as a ''stripped screw''.
[* blackred] An oversized driver fits into the screw only shallowly, if at all.
[* blackred] Beginners commonly make the mistake of using a driver that’s too small. An undersized driver slips easily, damaging the screw head and making it difficult to turn afterward—even with a correctly-sized driver. This is known as a ''stripped screw''.
[* blackred] An oversized driver fits into the screw only shallowly, if at all.
[* black] When you find a driver that fits about right, compare the next size up as well as the next size down before you proceed.
[* black] In general, use the largest driver size that fits snugly into the screw.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie