Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #6

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Whenever you install a screw, first turn the screw counter-clockwise (in the “loosey” direction) to “seat” the screw.
[* black] Turn slowly until you feel the screw level off and sink slightly, then stop.
[* black] Now it's safe to tighten the screw.
[* icon_note] A properly seatedinstalled screw will turn easily until it's fully tight.
[* icon_caution] An improperly seatedthreaded screw isgets increasingly difficult to tighten—because itsthe misaligned threads are cutting intoacross the threads in the screw hole, causing permanent damage. This is known as "cross-threading."
[* black] If your screw doesn't tighten easily, back off and carefully re-seat itit, and try again.
[* icon_note] A properly seatedinstalled screw will turn easily until it's fully tight.
[* icon_caution] An improperly seatedthreaded screw isgets increasingly difficult to tighten—because itsthe misaligned threads are cutting intoacross the threads in the screw hole, causing permanent damage. This is known as "cross-threading."
[* black] If your screw doesn't tighten easily, back off and carefully re-seat itit, and try again.