Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Eric Rice

Bewerking goedgekeurd door Eric Rice

Voor
Na
Ongewijzigd

Stap regels

[* black] RemoveTo remove the cameras by pushingcamera, grab the front cameraribbon with tweezers and pull the camera through the mother board.
[* icon_caution] Do not pull on the
ribbon hard, but try to line up the camera so that fits through the motherboard and pulling outhole in the other sidemotherboard.
[* black] RemoveTo remove the cameras by pushingcamera, grab the front cameraribbon with tweezers and pull the camera through the mother board.
[* icon_caution] Do not pull on the
ribbon hard, but try to line up the camera so that fits through the motherboard and pulling outhole in the other sidemotherboard.
[* icon_note] The camera is double sided, as the Kurio 7 have both a front and a back camera.
[* icon_caution] Camera on the back is glued to the motherboard. Take caution removing the glue from the motherboard.

Afbeelding 1

Oude versie

Nieuwe versie