Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Ryan Stroman

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] To reach the battery, begin by turning your device over andWith a plastic opening tool, gently insert the Micro SD slot as shownprying end in the first picture.
[* black] With the flat side of your spudger, push it
between the white backingglass digitizer and the SD slot until you seesilver frame from the white backing lift up and hear/feel a clip pop out. Continue doing this all the way around the device until the white backing is completely off.
[* black] Once this step is complete, your device should look as it does in
front of the second picturedevice.
[* black] To reach the battery, begin by turning your device over andWith a plastic opening tool, gently insert the Micro SD slot as shownprying end in the first picture.
[* black] With the flat side of your spudger, push it
between the white backingglass digitizer and the SD slot until you seesilver frame from the white backing lift up and hear/feel a clip pop out. Continue doing this all the way around the device until the white backing is completely off.
[* black] Once this step is complete, your device should look as it does in
front of the second picturedevice.