Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Jerrell

Bewerking goedgekeurd door Jerrell

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] There is ribbon wiring under this PCB. Be careful not to damage it while removing the PCB.
[*
black] Slowly lift the PCB away from the rest of the device.device
[* icon_caution] There is ribbon wiring under this PCB. Be careful not to damage it while removing the PCB.
[*
black] Slowly lift the PCB away from the rest of the device.device
[* black] Remove the ribbon by first removing the brown insert piece from the connector on the button board
[* black] Pull the ribbon out of the connector on the button board by the blue tab.