Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Jackson McKay

Bewerking goedgekeurd door Jackson McKay

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slowly lift the PCB away from the rest of the device.
[* icon_caution] There isblack] Remove the ribbon wiring under this PCB. Be careful not to damage it whileby first removing the PCBbrown insert piece from the connector on the button board
[* black] Pull the ribbon out of the connector on the button board by the blue tab
.
[* icon_caution] There isblack] Remove the ribbon wiring under this PCB. Be careful not to damage it whileby first removing the PCBbrown insert piece from the connector on the button board
[* black] Pull the ribbon out of the connector on the button board by the blue tab
.