Ga door naar hoofdinhoud

Wijzigingen aan stap #14

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha


Stap regels

[* black] Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.
[* icon_caution] Pry up only on the connector—'''not''' on the socket itself.
[* black] Fold the front-facing camera cable out of the way.
[* icon_reminder] There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.