Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #6

Bewerken voor Kristen Gismondi —

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

[* black] Turn the camera with the lens facing down.
-[* icon_reminder] Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.
-[* black] Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.
+[* icon_note] Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.
+[* black] Use the iFixit opening tool to make leverage. Insert the opening tool in the seam where the front case and the back case assemble.
[* black] Carefully put pressure on the opening tool so the cover can gradually open.
[* black] Slowly slide the opening tool along the gap and around the edge of the camera.
-[* icon_reminder] When you are dissembling the back cover, the DC IN A/V OUT DIGITAL cover will also disassemble and fall off.
+[* icon_note] When you are dissembling the back cover, the DC IN A/V OUT DIGITAL cover will also disassemble and fall off.