PowerBook G4 Aluminum 17" 1-1.67 GHz Upper Case Replacement stap #6 geschiedenis

Wijzigingen aan stap #6

Bewerken voor David — 20 sep. 2010

	[* black] Remove the following 10 screws from the bottom case:
-	[* red] Three 1.7 mm Phillips from the front edge of the battery compartment.
+	[* red] Three 1.7 mm Phillips from the front edge of the battery compartment. Take these out carefully, as the catch is nearby and very magnetic.
	[* orange] One 3.9 mm T8 Torx to the right of the memory card.
	[* yellow] One 6.9 mm T8 Torx at the left edge of the memory compartment.
	[* green] Three 12.4 mm Phillips from the center of the row of screws along the back edge of the case.
	[* blue] Two 15.1 mm Phillips, one from either end of the row of screws along the back edge of the case.