Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #10

Bewerking door Alexander

Bewerking goedgekeurd door Alexander

Voor
Na
Ongewijzigd

Stap regels

[title] SolderPosition the battery holder
[title] SolderPosition the battery holder
[* black] Align the battery holder tabs with the white silkscreen outline on the PCB. Use tape to hold battery holder in place, if helpful.
[* yellow] Invert the board. The battery holder tabs should extrude through the holes, as shown. If this is not the case, reposition the tabs accordingly.