Ga door naar hoofdinhoud

Wijzigingen aan stap #17

Bewerking door Alexander

Bewerking goedgekeurd door Alexander

Voor
Na
Ongewijzigd

Stap regels

[*title] Position the LEDs
[*
black] Solder the LEDs are polarized: one side of the diode is positive, the other is negative. It is typical convention for an LED to be manufactured with its positive lead longer than the negative lead.
[* red] Positive lead (longer)
[* blue] Negative lead (shorter)
[* black] Insert the LED into the PCB as illustrated. Be sure to match up the positive lead of the LED (the longer one) with the positive pad on the PCB (marked with a "+").
[* black] Bend one of the leads down tightly. This serves as a securement so the part doesn't fall away while you solder.
[*title] Position the LEDs
[*
black] Solder the LEDs are polarized: one side of the diode is positive, the other is negative. It is typical convention for an LED to be manufactured with its positive lead longer than the negative lead.
[* red] Positive lead (longer)
[* blue] Negative lead (shorter)
[* black] Insert the LED into the PCB as illustrated. Be sure to match up the positive lead of the LED (the longer one) with the positive pad on the PCB (marked with a "+").
[* black] Bend one of the leads down tightly. This serves as a securement so the part doesn't fall away while you solder.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd