Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Alexander

Bewerking goedgekeurd door Alexander


Stap regels

[title] First melts
[* black] Rest the soldering iron on the battery pad to heat it up.
[* black] Once the pad is hot enough, begin adding solder.
[* black] If solder does not flow immediately when it comes in contact with the pad, remove it and allow the pad to heat up longer.
[* black] Apply a large gob of solder to the pad (as shown).
[* black] Tin the iron and return it to its stand.