Skip to main content

Wijzigingen aan stap #2

Bewerking door Sydney Paul

Bewerking goedgekeurd door Sydney Paul

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Starting at the top of the phone, carefully insert pryingplastic opening device into the seam.
[* black] Carefully slide device along the seam and around the corners of the phone until the back is separated from the front.
[* icon_note]
Note: Some force must be exerted. Be careful when taking off panel. Go slow.
[* icon_note] Note: theThe volume button will separate from the case, this is normal. It is not brokenbroken.
[* black] Starting at the top of the phone, carefully insert pryingplastic opening device into the seam.
[* black] Carefully slide device along the seam and around the corners of the phone until the back is separated from the front.
[* icon_note]
Note: Some force must be exerted. Be careful when taking off panel. Go slow.
[* icon_note] Note: theThe volume button will separate from the case, this is normal. It is not brokenbroken.