Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Lauren Thurston

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* yellow] Gently slide out the logic board, since there is a nub thats in between the case and the board.
-[* black] Place the board onto a flat surface.
-[* icon_caution] Small plastic buttons may fall off during this process, place them on the side if they do.
+[* orange] Gently slide out the logic board, since there is a nub thats in between the case and the board.

Afbeelding 1

Oude versie

Nieuwe versie