Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Therin Irwin

Wachtend op goedkeuring


Stap regels

[* black] Remove the screw holding the RAM cover.
[* black] to remove the RAM currently inside the computer, gently pull out the white tabs on each side of the RAM module.
[* black] The RAM should then pop up at an angle where it can be pulled out without damaging the socket.
[* black] Remove the RAM module
[* black] to insert the new RAM module, match the notch in the middle of the RAM to the notch in the laptop.
[* black] Insert the RAM at the same angle the other module came out at and make sure the end of the ram is actually in the slot. Gently push down on the RAM until it clicks in.
[* black] Replace the covering and screw down the covering