Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Tom Brandolini

Bewerking geweigerd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

+[* black] There is a small, square, plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.
+[* black] If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.