Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen in deze stap

Bewerking door Nishant Mattu

Bewerking goedgekeurd door Nishant Mattu

Voor
Na
Ongewijzigd

Stap regels

[* red] Unplug the speaker wires from the top circuit board by simultaneously squeezing the sides and pulling.
[* blue] Remove the ten 5.5mm screws located on the lid circuit board with the Phillips 0 screwdriver
[* icon_caution] Carefully hold the lid in place as you remove the screws to avoid ripping the electrical strip from the circuit board.
[* black] Slowly bring down the top circuit board,board while holding on to the plastic bottom strip.
[* black] Slowly bring down the top circuit board,board while holding on to the plastic bottom strip.