Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door Ruben Puentes

Bewerking goedgekeurd door Ruben Puentes

Voor
Na
Ongewijzigd

Stap regels

[* black] Flip the projector over.
[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.
[* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.
[* black] Flip the projector back over.
[* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical strips.