Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door Nishant Mattu

Bewerking goedgekeurd door Nishant Mattu

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the torx 10 screwdriver head.
[* yellow] Next, remove the two 10mm screws located near the lens side with the torx 10 screwdriver head.
[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the torx 10 screwdriver head.
[* yellow] Next, remove the two 10mm screws located near the lens side with the torx 10 screwdriver head.
[* icon_caution] Then proceed to lifting up the main lid cautiously to avoid ripping the electrical strips.