Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Kishan Patel

Bewerking goedgekeurd door Kishan Patel

Voor
Na
Ongewijzigd

Stap regels

[* black] Cover the LCD display with one of your hands.
[* black] Turn the internal cover over so that the LCD display is face down.
[* black] Slowly pull up the internal cover, separating thecover. The LCD display from the internal cover. The screen should fall right into your hand. Two rubber strips may be attached to
[* icon_note] If
the display or maytwo pink rubber serial wire holders fall fromout of the device separatelyslots above and below the LCD slot in the internal cover, just put them back in during replacement.
[* black] Slowly pull up the internal cover, separating thecover. The LCD display from the internal cover. The screen should fall right into your hand. Two rubber strips may be attached to
[* icon_note] If
the display or maytwo pink rubber serial wire holders fall fromout of the device separatelyslots above and below the LCD slot in the internal cover, just put them back in during replacement.
[* icon_reminder] Use the text on the back of the LCD as reference for the orientation of the replacement LCD in the multimeter. The multimeter will not display correctly if the LCD is inverted.
[* icon_note] If the pink foam serial wire holders fall out of the slots above and below the LCD slot in the internal cover, just put them back in.