Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Alec James

Bewerking goedgekeurd door Alec James

Voor
Na
Ongewijzigd

Stap regels

[* black] Cover the LCD display with one of your hands.
[* black] Turn the internal cover over so that the LCD display is face down.
[* black] Slowly pull up the internal cover, separating the LCD display from the internal cover. The screen should fall right into your hand. Two rubber strips may be attached to the display or may fall from the device separately.
[* icon_reminder] Use the text on the back of the LCD as reference for the orientation of the replacement LCD in the multimeter. The multimeter will not display correctly if the LCD is inverted.
[* icon_note] Don't worry ifIf the pink foam serial wire holders fall out of the slots above and below the LCD slot in the internal cover; Simplycover, just put them back in.
[* icon_note] Don't worry ifIf the pink foam serial wire holders fall out of the slots above and below the LCD slot in the internal cover; Simplycover, just put them back in.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd