Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Josh Watson

Bewerking goedgekeurd door Josh Watson


Stap regels

-[title] Remove/Service the Gearbox - Part 1
+[title] Remove/Service the Gearbox - Part 1/3
[* black] If you just need to remove the large gear, here's the time to do it. You can lift it off with a pair of pliers underneath.
[* black] Next, undo the screws holding the gearbox onto the mixer body. There is one on either side of the mixer (only one shown). If your motor is dead, you may not need to do this.