Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Benjamin Cochran

Bewerking goedgekeurd door Benjamin Cochran

Voor
Na
Ongewijzigd

Stap regels

[* icon_caution] Before opening the Fluke 77 Series III Multimeter, beBe sure any test leads are out and the multimeter is offoff before opening the device.
[* black] Turn the multimeter on its back, so it is display side down.
[* black] Lift up the back stand of the device, so you have access to the two covered screws below.
[* black] To do this, put
device by putting your thumb in the curved well at the bottom edge of the stand and popdevice, so you have access to the plastic flap outtwo covered screws below.
[* icon_caution] Before opening the Fluke 77 Series III Multimeter, beBe sure any test leads are out and the multimeter is offoff before opening the device.
[* black] Turn the multimeter on its back, so it is display side down.
[* black] Lift up the back stand of the device, so you have access to the two covered screws below.
[* black] To do this, put
device by putting your thumb in the curved well at the bottom edge of the stand and popdevice, so you have access to the plastic flap outtwo covered screws below.