Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Jeyca Domingo

Bewerking goedgekeurd door Jeyca Domingo

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] '''The bottom panel screws must be removed in order to access the back panel.'''
[* red] There are 4four screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panel with the Phillips #00#1 screwdriver.
[* red] There are 4four screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panel with the Phillips #00#1 screwdriver.
[* icon_note] Even after removing the screw covers, the adhesive on them should be sticky enough to attach the covers back on when reassembling the device.
[* icon_note] Different colours for screws.