Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Michael Johnson

Bewerking goedgekeurd door Michael Johnson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] '''The bottom panel screws must be removed in order to access the back panel.'''
[* red] There are 4 screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panelpanel with the Phillips #00 screwdriver.
[* red] There are 4 screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panelpanel with the Phillips #00 screwdriver.
[* icon_reminder] There is an adhesive that keeps the screw covers to the bottom of the device. Even after removing them, they should be sticky enough to attach back on when reassembling the device.