Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Michael Johnson

Bewerking goedgekeurd door Michael Johnson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] There are 4 screw covers and screws that need to be taken off the bottom.
[* black] Use the spudger
'''The bottom panel screws must be removed in the same manner as the last stepsorder to get these screw covers off.
[* black] Then use
access the phillips screwdriver (#) to take outback panel.''' Remove them in the four screwssame manner.
[* black] There are 4 screw covers and screws that need to be taken off the bottom.
[* black] Use the spudger
'''The bottom panel screws must be removed in the same manner as the last stepsorder to get these screw covers off.
[* black] Then use
access the phillips screwdriver (#) to take outback panel.''' Remove them in the four screwssame manner.
[* icon_note] There is an adhesive that keeps the screw covers to the bottom of the device. There should be enough so that they will stay on when reassembling the device.