Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Brett Langlois

Bewerking goedgekeurd door Brett Langlois


Stap regels

[* icon_note] '''The bottom panel screws must be removed in order to access the back panel.'''
[* red] There are four screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panel with the Phillips #1 screwdriver.
[* orange] Remove the two 12mm screws.
[* icon_note] Even after removing the screw covers, the adhesive on them should be sticky enough to attach the covers back on when reassembling the device.
[* icon_note] Different colours for screws.

Afbeelding 1

Oude versie

Nieuwe versie