Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Michael Johnson

Bewerking goedgekeurd door Michael Johnson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] '''The bottom panel screws must be removed in order to access the back panel.'''
[* blackred] There are 4 screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same mannermanner as the back panel.
[* icon_reminder] There is an adhesive that keeps the screw covers to the bottom of the device. ThereEven after removing them, they should be sticky enough so that they will stayto attach back on when reassembling the device.
[* blackred] There are 4 screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same mannermanner as the back panel.
[* icon_reminder] There is an adhesive that keeps the screw covers to the bottom of the device. ThereEven after removing them, they should be sticky enough so that they will stayto attach back on when reassembling the device.

Afbeelding 1

Oude versie

Nieuwe versie