Wijzigingen aan stap #4
Bewerken voor Stefan Raducu —
Bewerking geweigerd door Scott Havard
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] ''Edit'': the correct temperature is almost 180-200 °C because around the chip there is a little black protection that can go under the chip. | |
| [* black] Set a low air flow: 1 or 2 (on a 1 to 7 scale). | |
| [* black] Now, doing circular movement, you have to reflow for 4-5 minutes. | |
| [* icon_caution] Be careful to reflow only the Wi-Fi chip and not any of the surrounding ICs or circuits. | |
| - | [* black] After 5 minutes, gradually decrease the temperature from 200 to 0 °C. |
| + | [* black] After 5 minutes, gradually decrease the temperature from 200 to 0 °C. ( for me work on 350 C |