Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] During the display assembly removal process, it is highly likely that the metal clips around the perimeter of the of the display assembly will break.
[* red] To replace a broken clip, first remove the T4T5 Torx screw securing the broken base of the clip to the display assembly.
[* black] Place a new clip on the positioning pins molded into the display frame, and reinstall the T4T5 Torx screw to secure the two pieces together.
[* red] To replace a broken clip, first remove the T4T5 Torx screw securing the broken base of the clip to the display assembly.
[* black] Place a new clip on the positioning pins molded into the display frame, and reinstall the T4T5 Torx screw to secure the two pieces together.
[* icon_reminder] Repeat this process for any other broken clips around your display assembly.