Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door Scott Kreidler

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully remove the inside from the shell.
[* black] If the inside is still stuck to one half of the shell, it's probably a) glue around the edge of the A/C connector, and/or b) the foam glue between the inside and the flat of the shell. Use a screwdriver to pry the edge of the A/C connector from the shell, and carefully insert a screwdriver between
the shell and the inside to break the foam glue.
[* black] You may find the metallic sheeting to break a little, it's oklittle; that's okay, but try to minimize the damage!
[* black] Carefully remove the inside from the shell.
[* black] If the inside is still stuck to one half of the shell, it's probably a) glue around the edge of the A/C connector, and/or b) the foam glue between the inside and the flat of the shell. Use a screwdriver to pry the edge of the A/C connector from the shell, and carefully insert a screwdriver between
the shell and the inside to break the foam glue.
[* black] You may find the metallic sheeting to break a little, it's oklittle; that's okay, but try to minimize the damage!