Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully remove the inside from the shell.
[* icon_caution] '''Be careful not to touch any of the capacitor leads, or you may receive an electric shock.'''
[* icon_note] If the inside sticks to one half of the shell, it's probably due to (a) glue around the edge of the A/C connector, and/or (b) foam glue between the inside and the flat of the shell.
[* black] Use a heavy duty spudger or other pry tool to pry the edge of the A/C connector from the shell, and carefully pry between the shell and the inside to break the foam glue.
[* icon_caution] Use only ESD-safe pry tools. Do '''not''' use metal pry tools or screwdrivers.
[* black] You may find the metallic sheeting breaks a little; that's okay, but try to minimize the damage!