Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully remove the inside from the shell.
[* blackicon_note] If the inside is still stucksticks to one half of the shell, it's probably adue to (a) glue around the edge of the A/C connector, and/or b) the(b) foam glue between the inside and the flat of the shell.
[* black]
Use a screwdriverheavy duty spudger or other pry tool to pry the edge of the A/C connector from the shell, and carefully insert a screwdriverpry between the shell and the inside to break the foam glue.
[* black] You may find the metallic sheeting to breakbreaks a little; that's okay, but try to minimize the damage!
[* blackicon_note] If the inside is still stucksticks to one half of the shell, it's probably adue to (a) glue around the edge of the A/C connector, and/or b) the(b) foam glue between the inside and the flat of the shell.
[* black]
Use a screwdriverheavy duty spudger or other pry tool to pry the edge of the A/C connector from the shell, and carefully insert a screwdriverpry between the shell and the inside to break the foam glue.
[* black] You may find the metallic sheeting to breakbreaks a little; that's okay, but try to minimize the damage!