Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door Matthew Newsom

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert a spudger between the top edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.
[* black] Using a spudger, workWork along the top edge of the display until the rear bezel is evenly separated from the front bezel.
[* black] Using a spudger, workWork along the top edge of the display until the rear bezel is evenly separated from the front bezel.