Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #17

Bewerking door David Hodson

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the single 6.3 mm Phillips screw securing the upper half of the battery compartment to the Newton.
[* black] While lightly lifting the upper half of the battery compartment, use the edge of an iPoda plastic opening tool to release the five clips along its outer edge.
[* black] While lightly lifting the upper half of the battery compartment, use the edge of an iPoda plastic opening tool to release the five clips along its outer edge.
[* black] Lift the upper half of the battery compartment and gently lay it on the logic board.