Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #10

Bewerking door Andrew Bookholt

Wachtend op goedkeuring


Stap regels

[* red] Remove the four 12 mm Phillips screws securing the rear case to the Newton.
[* black] Beginning with the seam where the display cover used to be attached, use an iPod opening tool to release the three clips along the power button side of the Newton.
[* icon_caution] These clips are constructed of plastic, making them inherently delicate. To avoid breaking them, do not force the two components apart.
[* black] Continue prying along the left side of the newton and proceed to free the clips along the Newton's lower edge.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie