Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower leftright corner of the display.
[* icon_caution] '''Do not''' try to insert the spudger between the front display bezel and its plastic surround.

[* black] UseWhile carefully prying the rear display bezel away from the display assembly, use a thin flat headsmall flathead screwdriver to depresspry the rightward most inward clipsmall steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
[* black] Repeat the above procedure until you've released at least three clipsall the clips along the right side of the display.
[* black] Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower leftright corner of the display.
[* icon_caution] '''Do not''' try to insert the spudger between the front display bezel and its plastic surround.

[* black] UseWhile carefully prying the rear display bezel away from the display assembly, use a thin flat headsmall flathead screwdriver to depresspry the rightward most inward clipsmall steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
[* black] Repeat the above procedure until you've released at least three clipsall the clips along the right side of the display.