Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door picobrew

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] The tip of my power supply plug broke off inside the power receptacle.
[* black] Once the DC-in board has been removed.
[* black] Peal back the metal RFI shield.
[* black] At the back of the power receptacle - gently pull the top of the center tab out away from the receptacle body. Forming a gap.
[* black] From the front of the receptacle - use a screwdriver to push the broken tip out the gap.
[* black] Push the center tab back in place.
[* black] Replace the RFI shield.