Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
[* black [* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
[* orange
] Remove the small piece of adhesive backing from the digitizer cable.
[* black [* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
[* orange
] Remove the small piece of adhesive backing from the digitizer cable.