Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Joseph

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] The USB ports are located on the back side of the monitor, below the plastic cover and metallic panel; on the lower left hand side.
[* black] The first step is to remove the plastic cover panel.
[* black] To do so, remove the three 2mm hex screws on the monitor's stand, as well as the four 2mm hex screws located on the four corners of the back plastic cover panel.
[* black] With these screws removedicon_caution] After removing the mentioned screws, it is possible to take off the back panels can be pulled throughand began examining the inner components. Make sure main cable and removedi pulled through plastic port.
[* black] With these screws removedicon_caution] After removing the mentioned screws, it is possible to take off the back panels can be pulled throughand began examining the inner components. Make sure main cable and removedi pulled through plastic port.
[* black] For additional help removing the back panel, refer to the repair guide for the LCD Main Board.