Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Joseph

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] The USB ports are located on the back side of the monitor, below the plastic cover and metallic panel; on the lower left hand side.
[* black] First, the back panels must be removedThe first step is to accessremove the portplastic cover panel.
[* black] To do so, remove the three 2mm hex screws on the monitor's stand andstand, as well as the four 2mm hex screws located on the four corners of the back panel as wellplastic cover panel.
[* black] First, the back panels must be removedThe first step is to accessremove the portplastic cover panel.
[* black] To do so, remove the three 2mm hex screws on the monitor's stand andstand, as well as the four 2mm hex screws located on the four corners of the back panel as wellplastic cover panel.
[* black] With these screws removed the back panels can be pulled through the main cable and removed.
[* black] For additional help removing the back panel, refer to the repair guide for the LCD Main Board.