Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Place the de-soldering wick on the solder joint and put the tip of the solder gun on it so the wick can heat up and absorb the old solder.
[* blackicon_caution] Please remember that logic board components are very fragile and excessive heat can destroy these components.
[* black] *IMPORTANT* When you bringicon_caution] '''Lift the wick and the solder gun up from the logic board do it together withat the solder gun ,failuresame time.''' Failure to do so can cause the leftover solder to harden and solder the wick to the logic board and you could easily pull a logic board pad off.
[* blackicon_caution] Please remember that logic board components are very fragile and excessive heat can destroy these components.
[* black] *IMPORTANT* When you bringicon_caution] '''Lift the wick and the solder gun up from the logic board do it together withat the solder gun ,failuresame time.''' Failure to do so can cause the leftover solder to harden and solder the wick to the logic board and you could easily pull a logic board pad off.