Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #8

Bewerking door Tai

Bewerking goedgekeurd door Sam Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] We should now have removed the 2 big flex cables attached to their respective and mutual boads. The 2 antenna wires and be removing the main logic board.
[* black] We can now start the process of removing the battery. Of all the things held down by adhesive in this device the battery is the most difficult thing to remove. Using a flat plastic pry tool pry up the edges of the battery and work you way to the middle from all sides
[* black] CAREFUL not to bend the battery totoo much i can not stress how well this battery is held in but be patient and just work at itit. Another method is using two long thin and flat plastic prytools to "cut" the adhesive and pry between the battery and body of the phone starting at the USB end. Don't risk a lithium fire by poking a hole in the battery!
[* black] CAREFUL not to bend the battery totoo much i can not stress how well this battery is held in but be patient and just work at itit. Another method is using two long thin and flat plastic prytools to "cut" the adhesive and pry between the battery and body of the phone starting at the USB end. Don't risk a lithium fire by poking a hole in the battery!
[* black] NOTE: when reassembling you could used a counter top and something flat to flatten the battery back out
[* black] The third pic is what we should have after the battery is removed