Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Elizabeth Zapata

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] At the other end of those 2 big flex cables they are brought together by a small control board. Disconnect the 2 clips (Green - LCD Orange - Digitizer) andand, the other ends of the antennas andantennas. Then remove the antenna wires completelycompletely.
[* black] This small control board is also held down by a little adhesiveadhesive, but can be carefully pried upup.
[* black] In the third picturepicture, marked in the Green square is a piece of plastic that is some whatkind of attached to the board itboard. It is better to just pry it up with the board than disconnect itit.
[* black] At the other end of those 2 big flex cables they are brought together by a small control board. Disconnect the 2 clips (Green - LCD Orange - Digitizer) andand, the other ends of the antennas andantennas. Then remove the antenna wires completelycompletely.
[* black] This small control board is also held down by a little adhesiveadhesive, but can be carefully pried upup.
[* black] In the third picturepicture, marked in the Green square is a piece of plastic that is some whatkind of attached to the board itboard. It is better to just pry it up with the board than disconnect itit.