Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Cole O'Neal

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[*
black] The flex cable running up the right side of the battery is connected to a smaller board, which is held to an EMI shield on the logic board with a small amount of adhesive,adhesive; it can be carefully pried up.
[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[*
black] The flex cable running up the right side of the battery is connected to a smaller board, which is held to an EMI shield on the logic board with a small amount of adhesive,adhesive; it can be carefully pried up.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they went.
[* blackicon_note] PAY ATTENTION to the side tab on the left flex cable thiscable. This piece can be peeled up the same way don'tway. Do not be afraid to bend it a little (BEND DO NOT BREAK).
[* blackicon_note] PAY ATTENTION to the side tab on the left flex cable thiscable. This piece can be peeled up the same way don'tway. Do not be afraid to bend it a little (BEND DO NOT BREAK).